Official BLU G9 G0130WW Stock Rom (MediaTek MT6762 Helio P22)
Official BLU G9 G0130WW Stock Rom (MediaTek MT6762 Helio P22)
The BLU G9 is a budget-friendly smartphone that offers a 6.3-inch HD+ display, a dual rear camera setup, a 13 MP selfie camera, a 4000 mAh battery, and a MediaTek MT6762 Helio P22 chipset. The device runs on Android 9.0 Pie out of the box and supports dual SIM cards, Wi-Fi, GPS, Bluetooth, and 4G LTE connectivity.
Download: https://tinourl.com/2w4lSY
If you own a BLU G9 smartphone and you want to flash or install the stock ROM on it, then you are in the right place. In this article, we will provide you with the official firmware file for the BLU G9 G0130WW model and a step-by-step guide on how to flash it using a flash tool.
Why You Need Stock Firmware?
Stock firmware is the official software that comes pre-installed on your device by the manufacturer. It is also known as the stock ROM or the factory ROM. There are many reasons why you might need to flash or install the stock firmware on your device, such as:
You want to unbrick your device if it is stuck in a boot loop, hard bricked, or soft bricked.
You want to restore your device to its original state if you have modified it with custom ROMs, root, or other tweaks.
You want to fix any software issues or bugs that might be affecting your device's performance or functionality.
You want to upgrade or downgrade your device's Android version if you are not satisfied with the current one.
You want to wipe out all your personal data and settings before selling or giving away your device.
Download Official BLU G9 G0130WW Stock Firmware
Before you proceed with the flashing process, you need to download the official stock firmware file for your BLU G9 G0130WW model. You can download it from one of the following links:
SourceDownload Link
Android MTK[Download]
Firmware Oficial[Download]
ROM Provider[Download]
The firmware file is in a compressed (zip) format and contains the scatter file, the flash tool, the USB driver, and the instruction manual. You need to extract the zip file on your computer using a tool like WinRAR or 7-Zip.
How to Flash Official BLU G9 G0130WW Stock Firmware
After you have downloaded and extracted the firmware file, you can follow these steps to flash it on your BLU G9 device:
Install the USB driver for your device on your computer. You can find it in the extracted firmware folder.
Run the flash tool (SP Flash Tool) as administrator. You can find it in the extracted firmware folder.
Click on the "Choose" button under the "Scatter-loading File" section and browse to the scatter file in the extracted firmware folder. It should have a .txt extension.
Make sure that all the partitions are checked and that the "Download Only" option is selected under the "Download" tab.
Turn off your device and remove the battery if it is removable.
Click on the "Download" button on the flash tool and connect your device to the computer using a USB cable while holding the volume down or volume up button.
The flashing process will start automatically and you will see a green checkmark when it is completed.
Disconnect your device from the computer and insert the battery if it was removed.
Turn on your device and enjoy the new stock firmware.
Conclusion
Flashing or installing the stock firmware on your BLU G9 G0130WW device is a simple and easy process that can help you solve many problems or improve your device's performance. However, you should always be careful and follow the instructions carefully to avoid any errors or damages. You should also backup your important data before flashing as it will erase everything on your device.
We hope that this article was helpful and that you were able to download and flash the official BLU G9 G0130WW stock firmware on your device. If you have any questions or feedback, feel free to leave a comment below.