Weierwei Vev 3288s Software Download

Weierwei Vev 3288s Software Download

If you are looking for a software to program your Weierwei Vev 3288s radio, you have come to the right place. In this article, I will show you how to download and use the official software from Weierwei Electron Science & Technology Co.,Ltd. , as well as some alternative software that might work for your radio.

What is Weierwei Vev 3288s?

Weierwei Vev 3288s is a handheld two-way radio that operates in the VHF band (136-174 MHz). It has 16 memory channels, a built-in FM radio, a flashlight, and a voice scrambler. It also supports CTCSS/DCS codes, VOX function, and low battery alert. It is compatible with Kenwood accessories and has a standard SMA antenna connector. It is also known as Weicom 3288S or VEV-3288S.

Download: https://t.co/qJCXkRypNF

Why do you need software to program your radio?

Although you can program your radio manually using the keypad and the menu, it can be tedious and time-consuming. Using software to program your radio can make it easier and faster. You can edit multiple channels at once, save and load your settings, and customize your radio's features. You can also backup your data in case you need to restore it later.

How to download and use the official software from Weierwei?

The official software from Weierwei is available on their website . You can find it under the "Download" section, then click on "Software". You will see a list of software for different models of Weierwei radios. Look for the one that matches your radio's model and frequency band. For example, if you have a VEV-3288S with a frequency range of 136-174 MHz, you should download the software named "VEV-3288S/338 New". Click on the "Download" link next to it and save the file on your computer.

The file you downloaded is a compressed ZIP file. You need to extract it using a program like WinZip or WinRAR. After extracting it, you will see a folder with several files inside. One of them is an executable file with the extension .exe. This is the software you need to run. Double-click on it to launch it.

The software interface is in Chinese, but you can change it to English by clicking on the second button from the left on the top toolbar. It looks like a globe with an arrow. A drop-down menu will appear with two options: Chinese and English. Select English and the software will switch to English.

Before you can use the software to program your radio, you need to connect your radio to your computer using a programming cable. The programming cable is not included with your radio, but you can buy it separately from online stores like eBay or Amazon. The cable has a USB connector on one end and a two-pin connector on the other end. Plug the USB connector into your computer's USB port and plug the two-pin connector into your radio's speaker/mic jack.

Once you have connected your radio to your computer, turn on your radio and set it to channel 16. This is the default channel for programming mode. Then, on the software, click on the first button from the left on the top toolbar. It looks like a computer with an arrow pointing up. This is the "Read" button. It will read the data from your radio and display it on the software screen.

Now you can edit the data as you wish. You can change the frequency, power, squelch level, CTCSS/DCS code, scan mode, etc. for each channel. You can also change the settings for other features like FM radio, voice scrambler, VOX function, etc. You can use the buttons on the left side of the screen to switch between different tabs.

After you have finished editing the data, you need to write it back to your radio. To do this, click on the third button from the left on the top toolbar. It looks like a computer with an arrow pointing down. This is the "Write" button. It will write the data from the software to your radio.

When the writing process is complete, you will see a message saying "Write OK". You can then disconnect your radio from your computer and turn it off and on again. Your radio is now programmed with your new settings.

What are some alternative software that might work for your radio?

If you have trouble using the official software from Weierwei, or if you want to try some different software, you can also use some alternative software that might work for your radio. However, these software are not guaranteed to be compatible with your radio, and they might cause some errors or damage to your radio. Use them at your own risk.

One of the alternative software that might work for your radio is the Puxing 6in1 software. This software is designed for Puxing radios, but some users have reported that it can also work for Weierwei radios. You can download it from this link . The software interface is in English, and it has similar functions as the official software from Weierwei. You can use it to program your radio in the same way as described above.

Another alternative software that might work for your radio is the CHIRP software. This software is a free and open-source program that can program many different models of radios from various brands. You can download it from this link . The software interface is in English, and it has a simple and user-friendly design. You can use it to program your radio by following these steps:

• Connect your radio to your computer using the programming cable and turn on your radio.

• Launch the CHIRP software and select your radio's model and port from the drop-down menus on the top left corner of the screen.

• Click on the "Radio" menu on the top toolbar and select "Download From Radio". This will read the data from your radio and display it on the software screen.

• Edit the data as you wish. You can change the frequency, power, squelch level, CTCSS/DCS code, scan mode, etc. for each channel. You can also change the settings for other features like FM radio, voice scrambler, VOX function, etc. You can use the tabs on the bottom of the screen to switch between different views.

• Click on the "Radio" menu on the top toolbar and select "Upload To Radio". This will write the data from the software to your radio.

• When the writing process is complete, you will see a message saying "Cloning completed". You can then disconnect your radio from your computer and turn it off and on again. Your radio is now programmed with your new settings.

Conclusion

In this article, I have shown you how to download and use the official software from Weierwei to program your Weierwei Vev 3288s radio, as well as some alternative software that might work for your radio. I hope you found this article helpful and informative. If you have any questions or comments, please feel free to leave them below. Thank you for reading!